DIY Non-Toxic Guide to Cleaning Windows Efficiently: Tried-and-True

DIY Non-Toxic Guide to Cleaning Windows Efficiently: Tried-and-True

Do you experience sneezing fits or mild breathing difficulty when cleaning windows with a store-bought product? Have you ever wondered why that happens?

Well, unfortunately, those very effective window cleaners just happen to be extremely toxic! Chemically enhanced to remove even the most stubborn stains from glass surfaces, these products are incredibly harsh and can cause a string of health issues such as triggering asthma attacks or allergies, respiratory problems and skin and eye irritation.

Clean Window

Now, what if we told you that it’s possible to clean your windows to perfection in a non-toxic manner? Are you intrigued? Then read on for our guaranteed guide to cleaning windows with your very own, 100% safe and effective homemade (DIY) window cleaner!

Here’s what you’ll need:

  • Filtered water
  • White distilled vinegar
  • Rubbing/isopropyl alcohol
  • Spray bottle
  • Microfibre cloths
  • Dust rags
  • Medium-bristled toothbrush (optional)
  • Drop cloths

Step One: Prepare the Area

Depending on how dirty your windows are, things may get a wee bit messy! Therefore, we advise clearing the space around the window by removing anything that is in the ‘splash zone’. 

Of course, there needn’t be any splashing as long as you aren’t being too hasty! It’s also a good idea to put down some drop cloths to soak up water that drips down to the rails and windowsill.

Finally, before you begin, change into an old t-shirt and put on some rubber gloves if you don’t want your bare hands to get soiled!

Step Two: Make the Cleaner

If you clean your windows regularly, a mild solution of just white vinegar and water will work just fine. On the other hand, a more soiled glass with stubborn stains will need an extra ingredient to help make your window panes spotless.

Given below are the measurements to make an effective cleaner for both soiled and mildly dirty windows. 

Mild Solution: 

  • 1 cup white distilled
  • 2 cups filtered/distilled water

Strong Solution: 

  • 1/3 cup white distilled vinegar
  • 1/2 rubbing/isopropyl alcohol
  • 2 cups filtered/distilled water

To make each DIY window cleaner, simply mix the ingredients thoroughly and then pour the solution into a spray bottle. And, as you always hear, make sure to shake well before use. 

Step Three: Dry Wipe

Before you think of wetting the window, make sure that you have removed as much dirt and dust from the surface as possible, using a clean dust rag.

It’s important that you be patient and thorough in this dry-wiping step. The removal of debris will make the rest of the cleaning a whole lot easier and less messy!

Be sure to also clean the corners and edges of the window pane, as this is where dirt tends to collect. An old toothbrush is of great help for this if you’re having difficulty.

Step Four: Spray the Window Pane

Scrubbing and Cleaning a Window

Spray your homemade window cleaner along the top sections of the pane and allow the cleaner to drip down. Be generous with the cleaning solution for a thorough clean.

Before you begin wiping, spritz some of the cleaner onto your microfibre cloth to dampen it just a little (this will help the cloth glide over the pane with ease). Then, begin wiping the top sections of your window using circular motions and just enough pressure to remove finger marks and light stains. Repeat this for the middle and bottom sections (i.e. spray the window and wipe) and allow it to air dry.

NOTE: If you find that the cleaner is drying up too fast, re-spray the area and wipe it quickly. To avoid streaking, clean your windows when it’s not too sunny or hot, as that will dry up the cleaner faster than it should.

Step Five: Spot Clean Stubborn Stains

Some stubborn stains like insect droppings and hardened dirt don’t always come out using the above method; hence, they require spot cleaning.

To do this, warm up your ‘strong solution’ and soak a clean, non-abrasive scrubber in it. Then, squeeze out some of the excess water and hold the scrubber over the stain for a few seconds before scrubbing at it. You can also use an old, medium-bristled toothbrush to spot clean if more abrasion is required to remove a stain.

NOTE: If needed, increase the strength of your window cleaner by adding more rubbing/isopropyl alcohol to the solution.

So, there you have it! An effective way to clean your windows (and other glass surfaces) with a DIY window and glass cleaner, without the use of harsh, toxic chemicals!

These handy window-cleaning tips were provided to us by Carpet Kings, who are carpet cleaning specialists from Sydney, Australia. They have been kind enough to sponsor this guest article and provide you with this DIY window cleaning guide. You can visit the Carpet Kings blog for more handy tips and tricks.

This guest post was sponsored by Carpet Kings, a carpet cleaning company in Australia.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Share
Tweet